Westport (Harmony), 2010 года

Harmony was built at Westport in 2010 by an experienced and discerning owner with a long history of building vessels.

Her main propulsion is the powerful MTU 16V 4000 series engine, this allows her to reach top speeds of 23 knots and cruise at 20 knots. Combine that with her 8 ft. draft, and you have vessel that can you get you anywhere and do it in a very short amount of time. Harmony ’S elegant design, gorgeous interior design, and large interior volume meld to give you a vessel built for comfortable cruising, whether it’s with a large family, or in a more intimate setting.

Accommodations

Harmony can accommodate up to twelve guests in six staterooms including an on deck master suite, a bridge deck VIP suite, below deck two king bedded cabins aft, a twin bedded cabin forward to port and a convertible gym forward to starboard with a Pullman berth. Crew accommodations for up to twelve with the captain’s cabin on the bridge deck and five double cabins below deck.

The Master Suite is entered from the starboard side hallway through the owner′s office. The full beam stateroom features a sitting area and generous closet space throughout.

The VIP cabin is located on the bridge deck with desk and chair. The suite includes a private terrace on the starboard side with teak deck furniture. The stateroom has an additional seating area for conversation or TV viewing.

The Harmony features an elevator that services all decks, including the sundeck.

Entering the yacht through the automatic doors on the aft deck with bar you enter the spacious Main Salon. Forward of the salon is the Dining room that can accommodate twelve guests. The Galley entrance and Pantry are to the port side. The Galley features a full complement of commercial equipment.

The Bridge Deck features a VIP lounge that include a card table to port and large flat screen TV and comfortable seating throughout. This area leads to the aft deck dining area perfect for large parties or quiet conversations.

The Pilothouse features state of the art electronics including night vision technology for safely cruising at night. There is ample seating for guests to enjoy the views from the Pilothouse.

The Sun Deck has a universal mounting system for carrying tenders and toys. There is a beautiful bar with windscreen forward for enjoying the area while cruising. Forward of the bar is a hot tub and sun lounges. There is access to the Sun Deck via a powered sliding hatch from the Bridge Deck foyer.

The Harmony has a very elegant interior and exterior design. She was built for comfortable family cruising.

Audio And Visual Equipment
Each accommodation space is equipped with audio/video entertainment equipment which provides for a variety of choices. (NTSC/PAL) satellite based radio and television, dockside cable services as well as on board audio/video sources such as DVD, CD and Kaleidescape storage system.

Direct TV D10 DSS Satellite Receiver, Channel Plus 4 Digital Quad Processor, Crestron CNX-BIPAD8 Processor, Speaker Craft BB1235 12- Channel Amplifier, Crestron Compact fixed resource Control System

Electrical System
(2) 99KW Northern Lights Generators hours, (1) 65KW Northern Lights generator hours.
The three generators provide AC power at 120-208 Volt/3 phase/60 cycle.

Two primary generators located port and starboard and auxiliary located midships in the engine room. One primary generator is fitted with a dry exhaust option that allows the exhaust to be discharged above the waterline.

There are (2) 100amp power cords fitted to GlenDinning Cable Master motorized shore power reels with local control at transom. The main electrical system is 4 wire, 3 phase 208 volts with 120 volt single phase branch circuits where required. The yacht is equipped with an ASEA seamless transfer shore power converter.

Batteries: Main Engine Start: (4) 24VDC 8D, House Bank: (2) 24VDC 8D, Generator Start Bank: (2) 24VDC Group 31, Emergency Bank: (4) 24VDC 8D, Reserve Source: (2) 24VDC Group 31.

Battery Chargers: 12 and 24 V DC chargers.
Electronics and Navigational Equipment
Harmony is equipped with modern navigation and communications equipment suitable for world wide cruising. The equipment includes satellite based position, speed, heading information, gyroscopic and magnetic heading data, long range surface detection, electronic charting and depth finding. Communications equipment spans numerous transmision technologies to maximize contact with shore side and marine stations as well as enhance safety. Equipment installed allows chartering under CISR flag. (GMDSS Capability and compatibility).

Furuno GP150 GPS, Furuno 2127 Black Box with 8″ Array radar w/ARPA, Furuno 2137 30W S-Band, Furuno FA 150 AIS system, JHI 20″ Nauticomp Marine DC Monitor, Transas NaviSailor 3000ECS Software, Navisailor 3000 standard with AIS level 3, ARPA, Tides and Currents,Raster BSB NDI NOS/GEO, Transas AIS NS3000 transponder interphace, JHI 23″ Nauticomp DC maritime monitor, FurunoGP 150 DGPS w/ MX420-8 port display, Furuno GPS/VHF Combo, Furuno 25W GMDSS DSC VHF/FM radio interfaced to GPS, Furuno Black DSC/VHF radio, handheld VHF, northern Airborne S1520 satFind 406MHZ GPIRB, Northern Airborne 9GHZ Portable SART, Furuno NX700B GMDSS IMO Navtec receiver, Furuno NX5 active antenna coupler, Furuno NX700B External data connector, Anschutz Standard 22 Compact Gyrocompass, Anschutz Gyrocompass expansion box, Richie magnetic compass, Simrad AP50 autopilot with thruster control, Brooks and Gatehouse Hydra 2000 full function depth-speed-wind, Furuno FCV 1200 black box sounder, JHI 17″ Nauticomp Marine DC Display, Furuno DS80 AmHz IMO Doppler speed log, APC 1000VA 670W smart UPS, Night Vision Techologies NightNav 5000

Vsat Seatel 5004 60″ radome, Satcom C Furuno Felcom 15 GMDSS Inmarsat SatCom, Furuno PP510 GMDSS printer, Stratos Globalstar GSP2900 SatPhone with antenna, Telelar SX5e GSM 850/1900 cellular phone, Panasonic KXTD 1232-5 Digital KSU Phone, Panasonic KXT7453 digital display 24 button black handsets with speakerphone, Panasonic KXT7425 Digital 24 button black handset speakerphones, Panasonic 900 MHZ multiline phones, Black Box lineshare Pro 102 Fox Interface

Engine /Mechanical Equipment
Propulsion is provided by two modern four stroke, 16 cylinder diesel engines providing 3650HP each. They are connected to custom 5 blade NiBrAl cast Michigan propellers via 5 1/2″ HS Stainless steel shafts and remote down angle gearboxes. Primary exhaust is underwater at chine while a Soundown silenced bypass exits at transom corners.

Main Engines: 16V4000 M-90, 3650 HP each with electronic with throttle synchronizing and LCD data display. DDC/Sturdy throttles and EDM for each engine.

Marine Gear: ZF Model 7550A, remote mount, 8 degree down angle, ratio 2.96:1 with trailing pump.

Stabilizers: (4) 32 Square Ft. fins Naiad Stabilization at Anchor System. The controller processes the signals from the motion sensor package and commands a calibrated signal to electro-hydraulic servo valves causing immediate rotation of the fins, which generate a substantial force. By timing the fin movement in perfect phase with the roll motion (acceleration, angular speed and deceleration) a righting moment is applied to the vessel, which dampens the vessel’s tendency to roll.

Exclusions
Owner′s and crews personal items, Art and Medical Supplies

Galley
Professional Chef′s Galley with a comercial atmoshere. Stainless steel countertops with ample room for food preparation, dumbwaiter separate pantry . Walk in frezer and walk in refrigerator. Dry storage for extended cruising. (2) Dishwashers, one coffee maker, expresso machine, microwave oven, Manitowoc commercial ice maker, 60 bottle wine cooler, Induction cook tops, combnation oven/steamer, salamander broiler, 24″ grille, warming drawers, disposal microwave oven, trash compactor.

Hull
The hull is laid up in a permanent female mold including molded in outages and inserts for bow thruster tube, transducer blocks, lightning and grounding plates, stabilizer tubes, raw water inlets, underwater exhaust, shaft logs, strut palms and rudder shafts.

The hull stringers, webs and stiffeners are either resin infused (straight longitudinal only) or hand laid. They are of fiberglass mat and roving and/or carbon fiber with vinylester resin over foam forms. All soles and structural bulkheads are of fiberglass and foam sandwich construction and are resin infused with vinylester resin. All structure is substantially tabbed and bonded to the hull shell.

Tenders
Custom made 21′ Castoldi Jet diesel tender stored in garage launched and retrieved using a cantilevered overhead beam crane.14′ RIB Nautica crew/rescue tender located on the sun deck .